Features of the machine:
- principle of the machine for straightening disks: recovery profile of the disk rim with rollers and hydraulic cylinder;
- availability tool for turning the disc.
Machine for straightening disks HETMAN-320 is designed for mechanical alignment of all types of disc wheels of cars and light trucks. The machine for dressing the discs can restore profile of seats for the installation of tires, eliminate ellipse, the radial and axial run-out motor drive applications without considerable physical effort.
Inserting a disc on the spindle machine for straightening disks HETMAN-300 is designed for mechanical alignment of all types of disc wheels of cars and light trucks. The machine for dressing the discs can restore profile of seats for the installation of tires, eliminate ellipse, the radial and axial run-out motor drive applications without considerable physical effort. carried out on the mounting holes with the disc to the hub of the car. Centering on the shaft drive machine for straightening disks by means of centering washers. Discs ZAZ Tavria studs on the spindle through a special faceplate.
The drive spindle machine for straightening disks has two speeds 15 and 250 rev / min. The lower rate is used to drive rolling casters, large – for grooving disc cutter, grinding discs for quality straightening.
Straightening disks also may be by hydraulic cylinders mounted to one of the stops provided on the machine. Hydraulic cylinder controlled by hydraulic valve handle. Place alignment on alloy wheels is necessary to preheat the burner (not supplied with the machine).
Frame straightening machine disk has a very rigid structure that contributes to the qualitative performance of works by rolling straightening and straightening disks.
Pointer beats allows you to quickly determine the location of subtle defects in disc-shaped.
Lever repair manual is intended for preliminary alignment drives on the machine.
|Disc Diameter, inches||12,00-24,00|
|Rim width, inches||4,0-12,0|
|Stroke hydraulic cylinder, mm||20|
|Shaft speed machine, rev / min||15 or 250|
|Installed power, kW||1,5|
|Weight, not more than, kg||510|
Complete with centering washer 20 pcs., Rests on the cylinder 5 pcs., Extension rod 3pc., Washers stem extension 5 mm-5 pc pointer runout, cutter, chuck ZAZ Tavria lever repair, set of mounting screws – 6 piece set of mounting screws L = 100 mm – 6 pcs set of mounting screws L = 40 mm, 6 pcs.
HETMAN-321 is powered by a three-phase 380V hydraulic hand-operated
HETMAN-322 – powered by a single-phase 220V, hydraulic hand operated
HETMAN-323 – powered by three-phase 380V electric hydraulics
HETMAN-324 – powered by a single-phase 220V, hydraulics with electric
Warranty versatile machine diskopravilny 12 months.